Original price was: £425.00.£399.99Current price is: £399.99.
Free UK delivery | 2 year warranty
High performance Motion detector featuring High Sensitivity and Rapid Response Circuitry for excellent recovery rate. Four interchangeable search coil options available.
The CSCOPE 3MX iPRO Detector is the latest edition from C-Scope in the cult 3MX models. The CS3MXi PRO features all the essential features which anyone requires for serious metal detecting using a professional detector, but without any of the complex menus and setup so often found on high performance detectors. In our opinion it is without doubt one of ‘the’ top general purpose detectors for professionals and serious metal detectorists alike.
The new version now features a 20 x 28cm 2D elliptical search coil as standard with three further interchangeable search head options also available.
Switch-on-and-go electronics coupled with a lightweight package and superb performance make the 3MXiPRO a real favourite. Automatic tuning is activated by the motion of the search-head passing over the ground.
The 3MXiPRO offers superb depth of detection and a variable discrimination setting which eliminates the signals from undesirable targets. The highly responsive 3MXiPRO provides a sharp target signal even at fast sweep speeds, providing an unbelievable FAST RESPONSE even next to iron. Signals are crisp and positive leaving no doubt when a good target is located.
The BMW M4 of metal detectors… comfortable with high performance when required!
The CS3MXiPRO price is £399.99 with free UK delivery, reduced from £425. People look for it as the cs3mxi pro, the c scope cs3mxipro and simply the 3MX, and all of those are this detector. It is the current version of the C.SCOPE 3MX line, which has a long following among British detectorists for being straightforward and hard to wear out.
| CS2MX | CS3MXiPRO | CS4MXi | |
|---|---|---|---|
| Price | £299.99 | £399.99 | £479.99 |
| Where it sits | Entry into the MX line | The all round choice | The step up |
| Operating system | Motion | Motion | Motion |
| Interchangeable heads | Fewer options | Four options | Four options |
| Setup | Simple | Switch on and go, no menus | More adjustment |
| Best for | A first serious British made detector | General purpose work on any UK permission | Detectorists who want more control |
| Price | £399.99, reduced from £425 |
|---|---|
| Operating system | Motion |
| Operating frequency | 17 kHz |
| Search head | Four interchangeable options. 20 by 28 cm 2D elliptical submersible head supplied as standard |
| Discrimination | Variable |
| Tuning | Automatic retune |
| Pinpoint | Toggle switch pinpoint function |
| Extra mode | All Metal Super Depth |
| Sensitivity | Adjustable |
| Battery | 8 x AA |
| Battery life | 30 to 40 hours, alkaline recommended |
| Weight | 1.45 kg including batteries |
| Audio | Internal loudspeaker, 6.3 mm headphone socket |
| Guarantee | 5 years parts cover, 2 years parts and labour |
| EAN | 5060086350999 |
| Operating System: | Motion |
| Operating Frequency: | 17kHz |
| Search-Head: | Four Interchangeable options. 20 x 28 cm 2D elliptical search head supplied as standard. |
| Battery Power: | 8 x AA |
| Typical Battery Life*: | 30-40 hours |
| Weight: | 1.45 kg (including batteries) |
| Guarantee**: | 2+3 years |
| * Depends on usage pattern and battery type. Alkaline recommended. | |
| ** 5 years parts cover. 2 years parts and labour. |
The whole range is on our C.SCOPE metal detectors page.
If you want a screen with a numeric target ID and tones that tell you what the metal probably is, this is the wrong detector. The CS3MXiPRO is a motion machine with variable discrimination and a pinpoint switch, not a display driven one. Plenty of people prefer that, but if you have been learning to read target numbers you will miss them.
If you detect wet salt beaches most weekends, pulse induction copes with salt far better than any motion detector. That is the C.SCOPE CS4Pi at £479.99.
If you want to get the detector properly underwater, the search head here is submersible but the control box is not. Look at a fully waterproof machine instead if wading is the plan.
And if £399.99 is more than you want to spend on a first detector, the CS440XD at £199.99 is the honest starting point. It is our best selling C.SCOPE for a reason.
£399.99, reduced from £425. In the C.Scope range it sits above the CS2MX at £299.99 and below the CS4MXi at £479.99.
Because they have a long reputation as the general purpose machine that simply works. The iPRO is the latest edition of that line, and C.Scope’s own view is that it is one of the top general purpose detectors for professionals and serious detectorists alike.
The absence of complex menus. It has the features needed for serious detecting without the setup procedures found on high performance detectors. For a lot of experienced detectorists that is the selling point rather than a compromise.
A 20 by 28cm 2D elliptical submersible search head as standard, with four interchangeable options available. The elliptical shape pinpoints more precisely and reaches into hedgerows.
It drops discrimination entirely for maximum reach. You will hear iron as well, which is the trade. On a quiet site chasing one deep signal it is the mode that finds it.
It keeps the machine tuned as conditions change, so there is less adjusting and more searching. Combined with the toggle pinpoint it makes the recovery part of detecting quick.
Motion at 17kHz, 8 x AA batteries giving 30 to 40 hours, 1.45kg including batteries, a choice of control box mounting points, an internal loudspeaker and a 6.3mm headphone socket. EAN 5060086350999.
It is what gives the machine its recovery rate: how quickly it resets after a signal and is ready for the next one. On ground with targets close together, a fast recovery is what stops two finds reading as one.
Yes, and it is the step most C.Scope owners make. The CS2MX at £299.99 is the switch on and go machine. The 3MXiPRO adds the rapid response circuitry and the elliptical coil for £100.
Two plus three years, which is five years parts cover with two years parts and labour, handled through us in the UK.
Yes, four interchangeable options to give deeper detection, greater ground coverage or better performance in specific conditions. Changing coil alters the machine more than any setting does.
The search head is submersible so dry sand and shallow water are fine. Wet salt sand defeats VLF machines generally, and our beach detecting page explains what to use instead.
It is one of the easier professional detectors to start on, because there are no menus to get lost in. The honest caveat is price: if you are not yet sure the hobby will stick, the CS440XD at £199.99 teaches you the same skills for half the money.
The CS4MXi at £479.99 gives you more to adjust. The CS3MXiPRO gives you less to think about. If you enjoy tuning a machine to a site, go up. If you would rather switch on and search, stay here.
Yes. C.SCOPE are a British manufacturer, which is also why spares and servicing are straightforward rather than a shipping exercise.
Five years parts cover, with two years parts and labour. That is unusually long for a detector at this price.
There are four interchangeable head options for this machine, and the 20 by 28 cm 2D elliptical comes as standard. Ring us with the coil you already own before ordering anything, because fitment across the C.SCOPE range is specific.
1.45 kg including the batteries, with a counterbalanced stem and an armrest. That is light for a machine with eight AA cells in it, and the control box can be mounted in more than one position to suit how you swing.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.