Conforms with European Norms NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2015 QMS

In conformity to CE, Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Electromagnetic Field-EMC conforms to International Health and Safety Norms

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.

Gives Alarm to all threat objects detected in different Alarm Zones.

Detects all threat objects even those hidden with camouflage, concealed and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

ThruScan/s6 Multi-Zone - 6 Matrix Detection Zones (Up/Middle/Down and Left/Right)

10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 standard pre-set international security program

Auto Calibration (Automatically calibrates itself to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

No Interference between Zones and No False Alarms

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Can detect when tested both individually and in combination.

Green/Red traffic control LEDs allow to enter 30 Persons / Min.

Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen

Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.

Five Digit Incoming Counter (Visible/Invisible)

Alarm Counter (Five Digit)

IR Pass Sensor On / Off selection

Four-digit changeable digital Pin Code

Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

Reloading the factory default settings by one-touch button

Easy programming and monitoring with wide LCD display

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

OPTIONAL -Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains

No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

IP 20 (Optional IP 65) Protection Level (EN 60529)

Manufactured for 7/24 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects

Audio-Visual alarms are noticeable at a range of 2 meters

Micro-Processor Settings do not change when there is an electricity cut-off

Strong plastic footers for sturdy placement and durable use.

In conformity to CE , Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment) Conforms with European Norms NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2015 QMS Electromagnetic Field-EMC conforms to International Health and Safety Norms Detects all threat objects even those hidden with camouflage, concealed and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. ThruScan/s3 Multi-Zone - 3 Vertical Detection Zones (Left/Middle/Right) Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top 10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 standard pre-set international security program Auto Calibration (Automatically calibrates itself to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. No Interference between Zones and No False Alarms Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media Gives Alarm to all threat objects detected in different Alarm Zones. Can detect when tested both individually and in combination Green/Red traffic control LEDs allow to enter 30 Persons / Min. Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit Metal Density Display by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation. Five Digit Incoming Counter (Visible/Invisible) Alarm Counter (Five Digit) IR Pass Sensor On / Off selection Four-digit changeable digital Pin Code Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment) Reloading the factory default settings by one-touch button Easy programming and monitoring with wide LCD display 4 Menu Languages, Standard menu in English, German, Spanish and Turkish OPTIONAL -Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains No seasonal adjustment requirement thanks to its Digital Electronic System Processing(DSP) Easy to mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design IP 20 (IP 65 Optional) Protection Level (EN 60529) Manufactured for 24/7 Continuous Operation 74 cm Net Passage Width and 200 cm Net Passage Height Interference free Operation at Middle Level Sensitivity of 10 cm for stagnate Metals and 200 cm for moving. Audio-Visual alarms are noticeable at a range of 2 meters Micro-Processor Settings do not change when there is an electricity cut-off Strong plastic footers for sturdy placement and durable use.

ELEKTRAL PROUDLY PRESENTS THE BRAND NEW THRUSCAN SX-I, WHICH MEETS NIJ 0601.02 NIJ 0601.03, ECAC, CE EUROPEAN UNION NORMS AND IS PRODUCED.

• The NEW ThruScan sX-i is a top quality, high performance Multi-Zone Security Walk Through Metal Detector, meets Internationally accepted Security Standards such as NIJ 601.02 SMALL-MEDIUM-LARGE Objects, CE European Union Norms and is produced under ISO 9001: 2015 QMS. Following are the specification of this product
• Weather Resistant IP 65 Protection (EN 60529), EN 60068, EN 60950 Class1, Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC.
• The immunity of the detector to the Environmental Interferences and Environmental Noise makes it suitable to be used in all sort of environments, especially in Military Premises, Courts and Airports.
• The Excellent Discrimination ability of the detector allows to easily distinguish between Threat Objects and Non-Threat Objects from the top to the bottom of the Walk Through Metal Detector.
• Due to the Auto Calibration and Auto Configuration feature, it does not need re-calibration when the detector is relocated or new Magnetic Objects brought Near-By.
• Multi-Zone Detection,
• 45 sensitivity levels with 300 adjustable sensitivity steps at each, several Sensitivity Program and 20 pre-set Security Programs.
• User Friendly Interface and Very Easy to Mount and Assemble
• Eliminating Environmental Interference using AUTOMATIC FREQUENCY SELECTION feature
• Excellent Reliability and Discrimination Capability, High Efficiency
• Ferrous / Non-Ferrous, Magnetic /Anti-Magnetic Metals and Mixed Alloys Detected Easily with High Accuracy
• Fast Scanning from top to bottom and high performance achieved by accurately pointing at the area where metals are detected on the people passing through.
• Communication capability using Mobile Phone, Tablet or PC through Wi-Fi, Ethernet, USB, RS-232, RS-422, RS-485 allowing access (through Mobile Network and/or Internet) to settings and statistics from any location all over the world.
• One device can connect to and control MULTIPLE NUMBER of Walk Through Metal Detectors.
• 64 x 128 GLCD, Seven digits IN/OUT counter, Metal Density Display by 10-level-VU meter, Green / Red bi-colour traffic LEDs.
• 60 People per minute passing speed, Speed Detection and warning if the speed is Fast or Slow.
• 35 Different Alarm Tones, 10 Volume Levels
• Separate Sensitivity Adjustment for Different Detection Zones, Individual Detection and/or in Combination Detection capability (can be witched ON and OFF).
• 0-100% adjustable Random Alarm Feature enabling to scan required number of clean visitors.
• Human Health friendly Very Low Frequency (VLF) technology, No harm caused to Pace Makers, Pregnant and Magnetic Media.
• Real Time Environmental Magnetic Noise Level Graphical Display and BITE - Built In test Equipment allowing automatic display of failures.
• Four-digit changeable digital Pin Code and Mechanical Lock.
• Standard menu language in English, German, Spanish, Turkish and Arabic (Optional Russian, Japanese, Polish, Bulgarian...etc.)
• Built-in UPS enabling 2 hours operation without mains and Non-Volatile Micro-Processor Memory Settings.
• Optional REAL-TIME VIDEO PROSECUTION UNIT / FACE RECOGNITION UNIT enabling recording of Alarmed /All Visitors photos or videos.

• International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2015 QMSCertified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)Multi-Zone - 9 Real Matrix Detection Zones (Up/Middle/Down and Left/Middle/Right)Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top Detects Metals regardless their orientation 10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 Standard preset International Security Program No Interference between Zones and No False Alarms Can detect test objects both individually and in combination. Metal Density-Mass by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit Can detect test objects both individually and in combination. Human Health friendly Very Low Frequency VLF technology, No effect on Pace Makers, Pregnant and Magnetic Media Green/Red bi-colour traffic LEDs easily allows sight from distance and LED Alarm Indicators on side panels Operation Mode, Programming Parameters and Error Codes are displayed on Wide 4x20 Characters LCD Screen Visual display of magnetic interference from environment. 10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) IP 44 (Optional IP 65) Protection Level (EN 60529) Five Digit Incoming/ Outgoing traffic counter (can be made invisible) with 60 persons/Min speed Alarms counted separately Interference free operation from other Electronic Equipment. Necessary altering precautions have been taken. Four-digit changeable digital Pin Code + Mechanical Lock Automatic Failure Display Function with continuous self-checking of key parameters (BITE - Built In test Equipment) Reloading the factory default settings by one-touch button Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)   4 Menu Languages, Standard menu in English, German, Spanish and Turkish Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms STANDARD Built-in Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains No seasonal adjustment requirement thanks to its Digital Electronic System (DSP) Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design Manufactured for 24/7 Continuous Operation 74 cm Net Passage Width and 200 cm Net Passage Height Interference free Operation at Middle Level Sensitivity of 10 cm stagnate for Metals and 200 cm distance for moving. Audio-Visual alarms are noticeable at a range of 4 meters Micro-Processor Settings do not change when there is an electricity cut-off No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic device. All Electronic Units (electronic unit, power supply, battery, adaptor etc...) are inside the Equipment. No external units. Strong plastic footers for sturdy placement and durable use. Resistant to Vibration & Impact Optional -SCADA Networking of Multiple Metal Detectors; Change settings by PC (Digital output for Network Connection) Manufactured using the latest technology and advanced components *PLEASE NOTE ALL PRICES EXCLUDE INSTALLATION AND DELIVERY*

• WEATHER PROOF METAL DETECTOR WITH IP 65 LEVEL PROTECTION FOR OUTDOOR USAGE AT MILITARY PREMISES NAVAL BASE ETC.

• INTERNATIONAL NORMS (NILECJ-0601 L1-5/IP65/EN60950 CLASS1) IN CONFORMITY WITH CE EUROPEAN UNION NORMS AND PRODUCED UNDER ISO 9001: 2015 QMS

• CERTIFIED IN COMPLIANCE TO EN 61000-6-3, EN 61000-6-1 REGULATIONS AND IN COMPLIANCE WITH DIRECTIVE 2002/95/EC (RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT).

• AUTO CALIBRATION (AUTOMATICALLY CALIBRATES ITSELF UP TO ENVIRONMENTAL CONDITIONS) NO SET UP CHANGES NECESSARY WHEN RELOCATED AND/OR NEW MAGNETIC OBJECTS BROUGHT NEAR-BY

• WHILST NORMAL OPERATION, DISPLAYS IN/OUT COUNTERS AND SECURITY LEVEL ON LCD WITHOUT ABBREVIATIONS SO THAT SECURITY STAFF CAN EASILY UNDERSTAND

• CAPABLE TO DETECT BOTH FERROUS AND NON-FERROUS METALLIC THREAT OBJECTS CONSIDERED DANGEROUS BY INTERNATIONAL SECURITY AUTHORITIES. CAN DETECT WHEN TESTED BOTH INDIVIDUALLY AND IN COMBINATION.

• DISPLAYS LOCATION OF THE DETECTED METAL OBJECTS WITH CONTINUOUS LED ZONE INDICATORS ON BOTH SIDE PANELS FROM TOP TO BOTTOM

• DETECTS ALL THREAT OBJECTS EVEN CONCEALED, HIDDEN WITH CAMOUFLAGE AND/OR WRAPPED. IMPOSSIBLE FOR SUCH THREAT OBJECTS TO PASS THROUGH THE WTMD WITHOUT CAUSING AN ALARM.

• HOMOGENEOUS MAGNETIC FIELD – NO DEAD POINTS – SAME DETECTION CAPABILITY FROM BOTTOM TO TOP

• DETECTS METALS REGARDLESS THEIR ORIENTATION

• MULTI-ZONE - 9 REAL MATRIX DETECTION ZONES(UP/MIDDLE/DOWN AND LEFT/MIDDLE/RIGHT)

• SEPARATE SENSITIVITY SETTINGS FOR DIFFERENT DETECTION ZONES

• NO INTERFERENCE BETWEEN ZONES AND NO FALSE ALARMS

• 20 SENSITIVITY LEVELS, 246 ADJUSTABLE SENSITIVITY STEPS AT EACH, PRE-SET NILECJ SENSITIVITY PROGRAM, - 7 PRESET SECURITY PROGRAMS

• AUTOMATIC FREQUENCY SELECTION FEATURE

• METAL DENSITY STRENGTH DISPLAY BY 10-LEVEL-VU METER WITH GREEN, YELLOW, RED LEDS EASILY ALLOWS SIGHT FROM DISTANCE

• SUPERIOR DISCRIMINATION, PIN POINT TARGET LOCATION IDENTIFICATION WITH GRAPHICAL ZONE DISPLAY ON CONTROL UNIT

• HUMAN HEALTH FRIENDLY VERY LOW FREQUENCY VLF TECHNOLOGY, NO AFFECTS TO PACE MAKERS, PREGNANT AND MAGNETIC MEDIA

• GREEN/RED BI COLOUR TRAFFIC LEDS EASILY ALLOWS SIGHT FROM DISTANCE AND LED ALARM INDICATORS ON SIDE PANELS

• OPERATION MODE, PROGRAMMING PARAMETERS AND ERROR CODES ARE DISPLAYED ON WIDE 64X128 CHARACTERS GLCD SCREEN

• REAL TIME ENVIRONMENTAL MAGNETIC NOISE LEVEL DISPLAY

• 10 ADJUSTABLE AUDIO TONES WITH 10 VOLUME LEVELS (ENABLING MUTE OPERATION) ADJUSTABLE ALARM DURATION

• IR PROTECTION FEATURE ENABLING PERFECT LOW FALSE ALARM OPERATION/ CONTINUOUS DETECTION MODE SELECTION ENABLED

• IP 65 PROTECTION LEVEL. WEATHER PROOF, OUTDOOR OPERATION(EN 60529)

• FIVE DIGIT INCOMING/ OUTGOING & ALARM COUNTERS (VISIBLE/INVISIBLE) WITH A SPEED 60 PERSONS/MIN.

• INTERFERENCE FREE OPERATION FROM OTHER ELECTRONIC EQUIPMENT. NECESSARY FILTERING PRECAUTIONS HAVE BEEN TAKEN.

• FOUR-DIGIT CHANGEABLE DIGITAL PIN CODE AND MECHANICAL LOCK

• AUTOMATIC FAILURE DISPLAY FUNCTION ON GLCD WITH CONTINUOUS SELF CHECKING OF KEY PARAMETERS (BITE - BUILT IN TEST EQUIPMENT)

• RELOADING THE FACTORY DEFAULT SETTINGS BY ONE-TOUCH BUTTON

• EASY PROGRAMMING AND DISPLAY VIA HIGH RESOLUTION GLCD (GRAPHICAL LIQUID CRYSTAL DISPLAY)

• 5 MENU LANGUAGES, STANDARD MENU IN ENGLISH, GERMAN, SPANISH, TURKISH AND ARABIC

• RELAY OUTPUT FOR RECORDING CCTV, PHOTO RECORDING, CONTROLLING TURNSTILES, ETC.&

• BUILT-IN UNINTERRUPTED POWER SUPPLY (UPS) ENABLING 2 HOURS OPERATION WITHOUT MAINS

• BATTERY ON/OFF FEATURE ENABLING OPERATION WITHOUT MAINS

• EASY-TO-MOUNT AND ASSEMBLE WALK THROUGH METAL DETECTOR (15 MINUTES) MALE/FEMALE SOCKET-CONNECTOR DESIGN

• MANUFACTURED FOR 24/7 CONTINUOUS OPERATION

• 74 CM NET PASSAGE WIDTH AND 200 CM NET PASSAGE HEIGHT

• INTERFERENCE FREE OPERATION AT MIDDLE LEVEL SENSITIVITY OF 10 CM FOR STAGNATE METALS AND 200 CM FOR MOVING

• INSTALLATION AND OPERATION WITHOUT INTERFERENCE BETWEEN TWO DETECTORS UP TO A DISTANCE OF MIN. 5 CM

• AUDIO-VISUAL ALARMS ARE NOTICEABLE AT A RANGE OF 4 METERS

• MICRO-PROCESSOR SETTINGS DO NOT CHANGE WHEN THERE IS AN ELECTRICITY CUT-OFF

• NO INTERFERENCE WITH STORAGE MEDIA, FLASH MEMORIES, CD, DISKETTES AND OTHER ELECTRONIC DEVICES

• ALL ELECTRONIC UNITS (ELECTRONIC UNIT, POWER SUPPLY, BATTERY, ADAPTER ETC..) ARE INSIDE THE EQUIPMENT. NO EXTERNAL UNITS.

• STRONG PLASTIC FOOTERS FOR STURDY PLACEMENT AND DURABLE USE.

• ABS RAIN SHELTER ON TOP

• OPTIONAL: ABS PROTECTIVE FOOTERS FOR INCREASED PROTECTION AND STRONG FIXING

• OPTIONAL: LOW VOLTAGE MAIN SUPPLY

• OPTIONAL -SCADA NETWORKING OF MULTIPLE METAL DETECTORS; CHANGE OF SETTINGS BY PC (DIGITAL OUTPUT FOR NETWORK CONNECTION)

• OPTIONAL REAL-TIME VIDEO PROSECUTION UNIT ENABLING RECORDING OF ALARMED/ALL VISITORS PICTURES OR VIDEO WITH TIME-STAMP TO SD CARD ~30.000 IMAGE

• OPTIONAL IRDA(PILOT) REMOTE CONTROL UNIT

International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2015 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Stats can easily understand

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

No Interference between Zones and No False Alarms

Multi-Zone - 9 Real Matrix Detection Zones(Up/Middle/Down and Left/Middle/Right) - 9 Independent Detection Zones

Factory and User-Definable Programs

Protection Programming Password

Audio and Visual Alarm

Adjustable Sensitivity Zones

Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from top to bottom

Separate Sensitivity Settings for Different Detection Zones

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation

20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, - 7 Preset Security Programs

Automatic Frequency Selection Feature

Metal Density Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Human Health friendly Very Low Frequency VLF technology, No reacts to Pace Makers, Pregnant and Magnetic Media

Green/Red bi-colour track through LEDs, easily allows sight from distance

60 Persons/Minute and LED Alarm Indicators side panels

Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen

Real Time Environmental Magnetic Noise Level Display

10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration

IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled

IP 44 (Optional IP 65) Protection Level (EN 60529). Optionally the IP level can be increased to IP65.

Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible)

Interference free Operation from other Electronic Equipment. Necessary altering precautions have been taken.

Four-digit changeable digital Pin Code and Mechanical Lock

Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)

5 Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic

Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc.

Built Uninterrupted Power Supply (UPS) system backup for 2-12hrs

Battery ON/OFF Feature enabling Operation Without Mains

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 7/24 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm stagnate Metals and 200 cm distance moving.

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units.

Strong plastic footers for sturdy placement and durable use.

Optional -SCADA Networking for Multiple Metal Detectors; Change settings by PC (Digital output for Network Connection)

Optional REAL-TIME VIDEO PROSECUTION UNIT enabling recording of Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images

Optional IRDA(Pilot) Remote Control Unit